F88GDI4 V2

The F88GDi4 ECU sets the benchmark for integrated direct injection engine management. Based on the F88 architecture the GDi4 is by no means a compromise. This control unit features efficient use of its IO complement specifically designed for a modern 4 cylinder engine yet cost effective for GDI and CI applications that do not require the complexity of the F90 series controllers.

This twin processor unit uses a high speed RISC processor for code execution and an additional large FPGA for high speed engine position tracking, allowing scheduling code to be independent of signal patterns thus increasing flexibility, efficiency and accuracy under transient conditions. This powerful combination also allows advanced control algorithms yet remains easy to calibrate for the end user.

The F88GDi4 is designed to directly drive all solenoid GD injectors including parts from Ford, GM and Bosch (including Bosch Motorsport types) without the need for an external driver box. Standard strategies include, turbocharged, supercharged, drive by wire, twin cam, twin vvt, vtec, gearbox, differential and many more. The internal data logging coupled with a unique crank and cam sync logger allows detailed analysis of input, control signals and fault diagnosis.

This powerful hardware is packaged within a lightweight high pressure die cast aluminium case designed to be installed in harsh Motorsport environments.

Expand / Collapse All


  • Powerful RISC CPU for advanced strategy execution
  • Custom synchronous FPGA processor for engine position tracking up to 25,000rpm


  • 24 user configurable general purpose Pulse Width Modulated power outputs, including:
  • 4 ignition coil outputs IGBT or TTL (Software configurable)
  • 12 general PWM/Port injector outputs
  • 4 dedicated GDI injector drive outputs (Software configurable power settings)
  • 3 full bridges also configurable as 6 half bridges or 6 PWMs (DbW & HDP-5)


  • 24 user configurable general purpose analogue sensor inputs, including 16 bipolar, inductive or hall effect speed / engine position inputs
  • 5 dedicated inputs, including:
  • 2 acoustic knock sensor inputs
  • 1 wideband (NTK) lambda sensor interface
  • 1 K-type thermocouple sensor interfaces


  • 100 MHz full duplex Ethernet for calibration, configuration and data download
  • 3 CAN 2.0B interfaces for communication with other controllers or logging systems
  • RS232 serial interface for communication with other controllers or logging systems


  • 64MB battery backed internal logging memory
  • Ultra Fast data download via Ethernet
  • Time/Date stamped data via real time clock

Power Supply

  • 6 to 32V input voltage range with reverse polarity protection
  • 2 regulated 5V sensor supply output with individual short circuit protection
  • 5 separately protected sensor and communication ground inputs


  • 88 Way Bosch / AMP sealed connector
  • High pressure die cast black powder coated aluminum case
  • Maximum dimension including the connector is 183mm x 125mm x 36mm
  • Operating temperature up to +85°C
  • Sealed to IP65 (when mated)
  • Total mass is 520 grams

Available Upgrade Features

  • Adaptive Knock Control
  • Diesel Control
  • Gearbox Control
  • Traction Control
  • Custom Security

Our Products